Main Power Control Center

Our enterprise is amongst one of the most reliable and trustworthy organizations, exclusively engaged in offering a wide range of Main Power Control Center. Our offered products are used to convert high voltage into less voltage as per the need of the clients. This Main Power Control Center distributes the power supply into various sub-distribution panels power control centers and feeder pillars. Our control centers are made available in different specifications as per the descriptions provided by the clients.

Power Control Centre is a main power control panel which consists of feeder breakers and supply breakers, monitoring devices, control devices, switching devices, protection devices, instrumentation devices, etc. It is also known as Main Switchboard. It is mainly installed near power sources hence its fault level is high. It is designed to suit fault level of 50KA or 65 KA for 1 sec. Bus Bar system in Power Control Centers are designed to suit the fault level as well as temperature rise to 40°c above ambient. Ample space is provided for cable termination. Various protections viz short circuit, overload, earth fault, under voltage etc are provided to protect source and equipment.

Features:

  • Durable
  • Sturdy construction
  • Non-corrosive
  • Easy to install

Specifications:

  • Industrial panel
  • Size: Customized
  • Electrical use

Technical Details

ConstructionFixed/Drawout Type, Fully Compartmentalized.
Design
The Panel Is Designed Fully Dust & Vermin Proof Considering All Technical Parameters, Easy To Use & Maintain By Highly Competent Design Engineers.
Protection Class
Ip42 / Ip 54 / Ip 55
Sheet
Crca Sheet Of 1.63Mm / 2.02Mm / 2.5Mm / 3.15Mm As Required. Modular Construction With Wide Choice Of Compartment Sizes. As Standard 2.02Mm Thick Sheet Is Used.
Surface Coating
Electrostatically Applied Epoxy Polyester Powder Coating Is Done After Proper Seven Tank Chemical Treatment Of Minimum 80Microns Thickness With Siemens Grey Colour Ral 7032 As Standard.
Rated Voltage
600 Volt, Ac, 50 Hz, 3 Phase, 4Wire
Rated Current
Up To 6000A Main Bus Bar
Short Circuit Level
Standard 50 Ka 1 Sec
Optional 65 Ka 1 Sec
Bus Bar
E91 Electrolytic Grade Aluminium/Copper Bus Bar Is Used
Busbar SupportSmc / Dmc
Bus Bar Insulation
Bus Bars Are Covered With Coloured Heat Shrinkable Sleeves
StandardIs 8623 Dt
Cable Chamber
The Cable Chamber Consists Of Ample Space For Termination Of Cables With Proper Cable Supports And Ventilation System For Heat Generated In Cables
Cable EntryTop / Bottom

Product Details

Busbar Support
E91 Electrolytic Grade Aluminum/Copper Bus Bar Is Used, SMC / DMC
StandardIS 8623 DT
Operating Voltage600 V
Phase3 – Phase
Degree of Protection
IP42 / IP 54 / IP 55
Sheet Thickness
1.63MM / 2.02MM / 2.5MM / 3.15MM
Ambient Temperature
Up to 40 Deg C
Rated Current
Up To 6000A Main Bus Bar
MaterialCRCA sheet
Capacity
50 KA to 65 KA 1 SEC